Canon ImageCLASS MF4570dw Basic Operation Manual Download

Page: 108 / 164

6-24

sing the F

ax F

unc

tions

Press

[

] or [

] to select <TX Start Speed>, and

then press [OK].

Fax Settings

TX Start Speed

RX Start Speed

Press

[

] or [

] to select the send start speed,

and then press [OK].

TX Start Speed

33600 bps

14400 bps
9600 bps
7200 bps

* When <Apply> appears in the screen, you must select <Apply>

and press [OK] after specifying the setting.

Press

[

] (Menu) to close the menu

screen.

The setting is complete.

Setting Items

The following system management settings are available.

System Settings

Communications
Settings

Fax Settings

“TX Start Speed” (

→

P.6-24)

“RX Start Speed” (

→

P.6-24)

“Memory Lock Settings” (

→

P. 6-24)

“Select Country/Region” (

→

P.6-24)

Restrict TX
Function

“Address Book PIN” (

→

P.6-25)

“Restrict New Destinations” (

→

P.6-25)

“Allow Driver Faxing” (

→

P.6-25)

“Restrict Sending From History” (

→

P.6-25)

“Fax No. Confirmation Re-Entry” (

→

P.6-25)

“Restrict Sequential Broadcast” (

→

P.6-25)

TX Start Speed

Change the transmission start speed if you have difficulty
starting a fax transmission.

How to display the settings

[

] (Menu)

→

→

→

<Fax

Settings>

→

Settings

(Bold: Default settings)

33600 bps

, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

RX Start Speed

Specify the receive start speed if you have difficulty
receiving faxes.

How to display the settings

[

] (Menu)

→

→

→

<Fax

Settings>

→

Settings

(Bold: Default settings)

33600 bps

, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

Memory Lock Settings

Normally, received documents are immediately printed.
However, you can specify whether or not to store received
faxes in memory before printing. You can then print the
stored faxes at any time or delete them without printing to
save paper.

How to display the settings

[

] (Menu)

→

→

→

<Memory

Lock Settings>

Settings

(Bold: Default settings)

Off

Does not use the Memory Lock mode.

Memory
Lock PIN:
Seven-digit
number

If you set a PIN, it will be necessary to
enter the PIN whenever you want to
change the Memory Lock mode settings,
or cancel the Memory Lock mode.

Print Report:
Off,

You can specify whether or not to print
the receive results when receiving a fax.
To use this feature, you must also
activate the “Receive Results” feature.

Memory
Lock Time:

Off

, On

If you specify <On>, documents are
received in the memory only within a
specified time.
Enter <Memory Lock Start Time> and
<Memory Lock End Time> respectively.

NOTE

Memory Lock PIN

• If you do not want to set the PIN, press [OK] without entering

any numbers.

• You cannot register consecutive digits that consist of only “0” as a

PIN, such as <0000000>.

• If you register a number that starts from <0>, the PIN changes

as follows.
Example: When you enter <02> or <002>, the PIN is specified as
<0000002>.

Select Country/Region

Specify the country or region where the machine is to be
used.

IMPORTANT

After configuration