1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-33
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Checking Dialing Line
Checking dialing line function enables you to configure the setting
on whether to check for a dial tone.
1.
Press [Additional Functions].
2.
Use
[
] or [
] to select <TX/RX SETTINGS>,
then press [OK].
3.
Use
[
] or [
] to select <FAX SETTINGS>,
then press [OK].
4.
Use
[
] or [
] to select <TX SETTINGS>, then
press [OK].
5.
Use
[
] or [
] to select <DIALING LINE
CHCK>, then press [OK].
6.
Use
[
] or [
] to select <ON>, then press
[OK].
7.
Press [Stop/Reset] to return to the standby
mode.
■
Dialing an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1.
Set
documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [SEND/FAX] repeatedly to select <FAX>,
then press [OK].
3.
Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
4.
If necessary, press [Recall/Pause] to insert a
pause.
F A X N U M B E R
T E L = 1 2 3 p 1 2 X X X X
Ex.
The letter <p> is displayed between the numbers.
You can enter successive pauses within the fax number to make
the pause time longer.
You can change the length of a pause inserted within the fax
number in the <PAUSE TIME> menu. The default setting is two
second. (See “TX/RX SETTINGS,” on p. 11-11.)
■
–
–
–
