1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-34
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5.
Use the numeric keys to dial the country code,
the area code, and the fax/telephone number of
the recipient.
6.
If necessary, press [Recall/Pause] to enter a
pause at the end of the number.
The letter <P> appears at the end of the fax number.
Pauses entered at the end of fax numbers are always 10 seconds
long.
7.
Press
[Start].
When you set the documents on the platen glass, press [
] or [
]
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS> in <TX/RX SETTINGS>, and if you have specified the
destination by any other method than using numeric keys, the
machine starts scanning automatically without pressing [Start], after
the preset time for this setting is elapsed.
–
–
