1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-39
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
4.
Press
[
] or [
] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press
[
] or [
] to select <PORT NO.>, then
press [OK].
6.
Press
[
] or [
] to select the protocol of
which you want to change the port number
(LPD, RAW, HTTP, SMTP RX, POP3 RX, SMTP TX or
SNMP), then press [OK].
7.
Use the numeric keys to enter the port number,
then press [OK].
8.
Press [Stop/Reset] to return to the standby
mode.
9.
Restart the machine.
IP Address Range Settings
You can restrict the machine access from the computers on the
network by specifying the range of IP addresses allowed/ forbidden
to access the machine.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press
[
] or [
] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press
[
] or [
] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press
[
] or [
] to select <SET IP ADD
RANGE>, then press [OK].
