1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
9-10
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Replacing the Toner Cartridge
When the LCD displays < TONER LOW/PREPARE NEW TONER>,
the machine will not print and stores all documents in memory
if it receives data. In this case, redistribute toner in the toner
cartridge. If the message persists, replace the toner cartridge.
If you want to print out the documents without replacing the
toner cartridge, set <CONT. PRINTING> to <KEEP PRINTING>
in <RX SETTINGS> of <TX/RX COMMON SET.> in <TX/RX
SETTINGS>. (See “Setting Menu,” on p. 11-6.)
When <CONT. PRINTING> is set to <KEEP PRINTING>, the printed
documents may be light or blurred because of lack of toner. The data is
erased when the documents are printed out, so you can not print the
same documents again.
Do not touch the rollers and parts which have labels “CAUTION! Hot
surface avoid contact” on. They become very hot during use.
When the toner level is low by pressing [Toner Gauge], replace the
toner cartridge.
–
–
Redistributing Toner
1.
Lift the scanning platform until it is locked (A).
(You will hear an audible “click.”)
2.
Open the toner cover (B), using the knob which
covers over on dent (A).
■
