1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-41
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Forwarding Received Documents
You can set the machine to forward received documents to other
machines or file servers. If a received document matches the
forwarding conditions, it is forwarded to the specified destination.
Forwarding settings can be made using the Remote UI.
For instructions on forwarding settings and how to turn on and off the
forward mode, see “Specifying Forwarding Settings,” on p. 7-15.
Forwarding Documents Received in Memory
1.
Press [System Monitor] repeatedly to select <TX/
RX STATUS>, then press [OK].
2.
Press
[
] or [
] to select the desired
document, then press [OK].
You can transfer only the documents received in memory, which
appears with the message <RX STNDBY> in the system monitor.
■
3.
Press
[
] or [
] to select <FORWARD>, then
press [OK].
4.
Specify the destination, then press [OK].
The machine starts to send the selected document.
You can specify only one destination registered in a one-touch key or
coded dial code.
Forwarding Documents with Forwarding Errors
1.
Press [System Monitor] repeatedly to select
<FORWARD ERR. STATUS>, then press [OK].
2.
Press
[
] or [
] to select the desired
document, then press [OK].
3.
Press
[
] or [
] to select <FORWARD>, then
press [OK].
