1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
9-2
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Cleaning the Machine
Note the following before cleaning your machine:
Make sure no document is stored in memory, then turn off the
main power switch and disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static
charges.
Never use volatile liquids such as thinners, benzene, acetone, or any other
chemical cleaner to clean the machine. These can damage the machine
components.
When you turn off the main power switch, the documents stored in
memory will be erased. To check the jobs stored in memory, see the
following:
Checking and Deleting Copy Jobs on p. 3-13
Checking and Deleting Sending/Receiving Documents Stored in Memory
on p. 4-48
Checking and Deleting Print Jobs on p. 5-9
–
–
–
–
–
–
Exterior
1.
Turn off the main power switch and disconnect
the power cord.
2.
Wipe the machine’s exterior with a clean, soft,
lint-free cloth dampened with water or diluted
dishwashing detergent solution.
3.
Wait for the machine to dry, then reconnect the
power cord and turn on the main power switch.
Interior
Clean the machine’s print area periodically to prevent toner powder
and paper dust from accumulating inside.
1.
Turn off the main power switch and disconnect
the power cord.
■
■
