1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
3-10
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
6.
Press [Start].
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the mode keys such as
[SEND/FAX], all settings will be also canceled. If you want to keep
the settings as the default, see “Setting Menu,” on p. 11-6.
Instead of performing step 4, you can just press [OK]. In this case,
the machine makes <BOOK TYPE> copies.
–
–
–
Reserved Copy
You can make copy settings and scan documents even if the
machine is currently printing. The scanned documents are
processed after the current job is complete.
1.
Set
documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press
[COPY].
3.
Set the desired copy mode and quantity (1 to
99), then press [Start].
You can reserve up to 5 copy jobs, with different settings for each
job.
When you set the document on the platen glass, press [Start] for
each document.
■
