Scanning with the WIA Driver (Windows Me/XP only)
3-13
Scanning
3
Properties
The following screen shows the Advanced Properties tab in Windows XP.
[Brightness]
Specifies the brightness (–60 to 60). (Only for color or grayscale
scanning.)
NOTE
You can also adjust the brightness in PageManager or OmniPage
if it is not specified sufficiently in this tab.
[Contrast]
Specifies the contrast (–35 to 35). (Only for color or grayscale
scanning.)
NOTE
You can also adjust the contrast in PageManager or OmniPage if it
is not specified sufficiently in this tab.
[Resolution (DPI)]
Selects the scanning resolution in dot per inch. Available resolutions
are: [75], [100], [150], [200], [300], and [600] dpi.
NOTE
You can enter the values of resolution listed above in the edit box
directly. If you enter an invalid value, the error message will
appear and the resolution will be corrected to the closest one.
[Picture type]
Selects the scanning color type ([Color picture], [Grayscale picture],
or [Black and white picture or text]).
[Reset]
Resets all the current settings to their default values.
