Chapter 8
8-3
8.1.2 Interval Speed Increase Control
0020-8556
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
To increase printing speed, the machine increases the speed in an interval which does not affect image formation.
The DC controller increases the process speed four times faster when the paper is fed to the reverse assembly. It also increases the process speed of duplex printing
four times faster at the duplex feed assembly.
T-8-1
F-8-3
SR708: pre-registration sensor
Timing
Single-sided printing
Duplex printing
Timing of increasing the speed
After the trailing edge of the paper passes through the
fixing delivery roller
After the trailing edge of the paper passes through the
fixing delivery roller
Timing of decreasing the speed
After the trailing edge of the paper passes through the
holding roller 2
When the leading edge of the paper reaches the pre-
registration sensor
Duplexing feed assembly
Reverse assembly
Decreasing
the speed
Increasing
the speed
Increasing the speed
SR708
Holding roller 2
Fixing delivery roller
Summary of Contents for imageCLASS MF9170c
