20
4
Click the [Feeding] tab.
5
Set [Feeding Option] to [Panel-Feeding].
6
Click [OK] to close the settings screen.
7
Click [OK] to close the scanner settings dialog box.
8
Place the document in the scanner, and start the scan
procedure from the application.
9
Press the start button on the scanner in which the
document is placed.
If the document is placed in the Canon document scanner,
pressing the start button on the scanner will start the scan
procedure.
If the document is placed on the flatbed, pressing the start button
on the flatbed will start the scan procedure.
When the document finishes scanning, the scanner waits for the
next document to be placed.
10
Place the next document to be scanned.
If you selected [Auto] for [Main Scanner/Flatbed] in step 2, you
can place the document in either the feeder or the flatbed to
continue scanning.
11
Repeat steps 9 and 10 until all documents are scanned.
12
Press the stop button on the scanner when all documents
have been scanned.
This completes the scan procedure.
NOTE
Depending on the application you are using and whether the flatbed
is connected, scanner operations when scanning with the [Feeding
Option] set to [Panel-Feeding] may differ as follows.
When scanning with only a
Canon document scanner
When scanning with the
flatbed connected
When you press the stop button
on the scanner, a dialog box
asking whether you want to
continue scanning appears.
You must press the stop button
on the scanner twice to display
the dialog box that asks whether
you want to continue scanning.
When you select the option to
continue scanning in the above
dialog box, the driver settings
screen appears automatically.
Selecting the option to continue
scanning will not automatically
display the driver settings
screen. You must press the start
button on the scanner.
