18
3
Select the scanner you are using (the name of the
connected Canon DR-series scanner should be followed
by “w/flatbed”), and click [Settings].
The [Configure Device Settings] dialog box appears.
IMPORTANT
If the flatbed and the Canon DR-series scanner are connected
properly, “w/flatbed” should appear after the scanner name. If
only the scanner name appears, try reinstalling the software
included on the setup disc provided with the flatbed.
4
Click [OK] to finish scanner selection.
5
Select [Scan Batch to File] from the [Scan] menu.
The [Scan Batch to File] dialog box appears.
6
Click [Scanner Setting], and configure the scanner
settings.
The properties dialog box for the scanner driver appears.
7
Configure the [Main Scanner/Flatbed] setting.
Select [Flatbed] if the document is placed on the flatbed, and
select [Main Scanner] if the document is placed in the Canon
DR-series scanner. If you select [Auto], any documents placed in
the feeder will be scanned. If there are no documents in the
feeder, scanning is performed on the flatbed.
