39
• When searching for scanners on the network to select a scanner with
Scanning Utility, the Scanner Name is displayed here. For details,
see “How to Use the Scanning Utility” on p. 28
[Network Setting]
[DHCP]
A
Check (ON) to automatically assign the IP address of the
scanner.
[IP Address]
B
Set the IP address of the scanner.
[Subnet Mask]
C
Set the Subnet Mask of the scanner.
[Default Gateway]
D
Set the Default Gateway of the scanner.
[OK]
E
Click [OK] to send settings to the scanner.
[mDNS Setting]
[mDNS]
A
Check (ON) to automatically search scanners.
NOTE
If not checked (OFF), enter the IP address of the scanner when
selecting a scanner in Scanning Utility.
[OK]
B
Click [OK] to send settings to the scanner.
A
B
C
D
E
A
B
