16
■
When you remove the power cord, grip it by the power plug head.
Never attempt to disconnect the power cord from the power outlet
by pulling on the power cord. Doing so may damage or expose the
cord’s internal wiring, and cause a fire or electrical shock.
■
Keep the area around the power outlet clear of all obstacles so you
can disconnect the power cord easily at all times.
■
Never spill water or volatile solutions (alcohol, benzene, paint
thinner) into the scanner. Doing so may cause a fire or electrical
shock.
■
When the scanner is not being used for a long period of time,
disconnect the power cord from the power outlet.
■
Avoid wearing loose fitting clothing, dangling jewelry, long ties, or
long hair that could become entangled with moving parts, especially
the rollers that feed paper into the scanner. If such objects become
entangled, immediately disconnect the power plug from the power
outlet to stop the scanner.
■
Be careful when you are loading a document or clearing a paper
jam. It is possible that the paper edges may cut your fingers.
■
Do not open the Maintenance Cover while the scanner is operating.
Doing so may result in a malfunction or injury.
■
Do not touch the pins and contacts on the scanner’s connector with
your hands. Doing so may result in a malfunction.
■
Do not touch anything except the operation buttons when
documents are being fed.
■
Do not turn the scanner upside down. The ink may leak from the ink
disposal tank.
■
It is prohibited to run scanning operations near electronic
equipment.
Installation Location
For operation, maintenance, and ventilation, make sure that there is
enough space around the scanner, as shown in the illustration above.
Avoid placing the scanner in the following places. It may cause a
malfunction and adversely affect the scanner or your computer.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or
similar object to shade the scanner.
• Places subject to dust and fumes
Dust and cigarette fumes adversely affect the components inside the
scanner.
• Near running water, a heat source, water vapor, or in an area, such
as a laboratory exposed to ammonia gas, paint thinner, or other
volatile chemicals
• Places subject to excessive vibration and shock
100 mm (3.9")
100 mm (3.9")
100 mm (3.9")
100 mm (3.9")
