23
3
Push the ink cartridge backward, and then remove the ink
cartridge.
CAUTION
Do not touch the ink jet nozzle right after imprinting. The nozzle
may be very hot.
4
Place the ink cartridge shown in the diagram below.
CAUTION
Do not touch the electrical contact on the carriage. Doing so may
cause a malfunction.
NOTE
Do not use more than one cartridge by rotation. If you do so,
applications cannot check the ink level precisely.
5
Push down the ink cartridge until it clicks into place.
IMPORTANT
Make sure that the ink cartridge is securely in place.
6
Squeeze the Print Position Adjustment Lever and move it
to adjust the print position.
Top:
1.92" (48.8 mm) from the bottom edge of the document
Bottom:
1.17" (29.6 mm) from the bottom edge of the document