background image

Before Using the Scanner

9

Ch

a

p

te

r 1

• Do not locate the scanner in a humid or dusty location. Doing so 

might cause fire or electric shock.

• Do not place objects on top of the scanner. Such objects may tip 

or fall over, resulting in personal injury. 

• To prevent any risk of fire or electric shock, make sure that the 

power source meets the power requirements of the unit.

• When unplugging the power cord, grasp it firmly by its plug. Do 

not pull directly on the power cord, as this may damage or 
expose the cord’s internal wiring, resulting in a fire or electric 
shock.

• Leave sufficient space around the power plug so that it can be 

unplugged easily. If objects are placed around the power plug, 
you will be unable to unplug it in an emergency.

• Do not allow water or flammable substances (alcohol, paint 

thinner, benzene, etc.) to spill into the scanner, as this may 
result in a fire or electric shock.

• Turn OFF the power switch for safety when not using the 

scanner for a long period of time, such as overnight. Also, turn 
OFF the power switch, and disconnect the AC adapter from the 
scanner and disconnect the power cord from the power outlet 
for safety when the machine will not be used for an extended 
period of time, such as during consecutive holidays.

• Do not wear loose clothing or jewelry that may get caught in the 

scanner while you are using it. This may result in personal 
injury. Be extra careful of neckties and long hair. If anything 
becomes caught in the scanner, immediately disconnect the 
power cord to stop the scanner.

• Open the feeder gently to avoid causing a malfunction or 

personal injury.

• Close the feeder gently to avoid catching your fingers, as this 

may result in personal injury.

• Do not press down hard on the feeder when using the platen 

glass to scan thick books. Doing so may damage the platen 
glass and result in personal injury.

• Never place any object other than documents to be scanned into 

the feeder or on the platen glass. Doing so may result in scanner 
malfunction.

• When using the scanner in the winter or cold weather, allow it to 

warm up after turning it on. Not doing so may cause 
condensation to form or an error to occur.

Disposal

• When disposing of this scanner, be sure to follow all local ordinances and 

laws or consult with the retailer who sold you the scanner.

DR-1210C.book  Page 9  Monday, December 19, 2005  10:35 AM

Summary of Contents for imageFORMULA DR-1210C



































































































Reviews: