26
When scanning multiple page documents that are fastened together, such as
invoices, place the documents so that the edge that is fastened together is
facing down.
1
Switch the feed selection lever to
(Bypass).
2
Adjust the document guides to fit the width of the document to be scanned
(See p.24).
3
Place the document with the reverse side facing you, and the top of the
document facing down (See p.24).
4
Use the application software to start scanning.
IMPORTANT
After you finish scanning, close the document feed tray and the document eject
tray to prevent damage to the scanner while it is not being used.
1
Switch the feed selection lever to
(Bypass).
CAUTION
•
When scanning cards, make sure to set the feed selection lever
to
(Bypass).
•
The maximum number of cards that can be scanned at a time is three.
2
Adjust the document guides to fit the width of the card to be scanned (See
p.24).
Feeding in the Bypass Mode
Placing Cards
