COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 29
CHAPTER 3 DISASSEMBLY & REASSEMBLY
9. Lower registration roller
1) Detach the right/left cover assembly.
2) Detach the lower entry guide plate cover and
the lower entry guide plate. Refer to the
section entitled "Retard motor".
3) Detach the registration clutch.
4) Remove
two
E-rings (one on each side)
and two bearings
(one on each side), and
lower the lever
to detach the lower
registration roller
.
E-ring
Bearing
Lever
Lower registration roller
Fig. 3-320
Precautions during assembly
•
Lower the lever
and install the lower
registration roller
into the hole in the
right-side plate so that it is positioned at the top.
Lever
Lower registration roller
Fig. 3-321
Summary of Contents for ImageFormula DR-9080C
