COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 35
CHAPTER 3 DISASSEMBLY & REASSEMBLY
IV. READING
SECTION
1. Front reading unit
1) Detach the right/left cover assembly.
2) Open the upper unit.
3) Detach the upper registration roller guide
and the upper reading roller guide
.
And then, push the stopper
on each side,
and pull the front reading unit
out toward
the front.
Upper registration roller guide
Upper reading roller guide
Stopper
Front reading unit
Fig. 3-401
4) Unhook four connectors
and detach the
front reading unit .
Note:
Be careful not to lose the spring
attached to the stopper.
Connector
Front reading unit
Spring
Fig. 3-402
Precautions during assembly
•
Be careful not to pull in the connected cable
assembly.
•
Remember to attach the spring on the back
side.
•
Clean the reading glass.
•
The back registration sensor PCB is mounted in
the front reading unit, Detach the PCB as
necessary.
Summary of Contents for ImageFormula DR-9080C
