Canon ImageFormula DR-9080C Service Manual Download

Page: 9 / 366

1 - 1

CHAPTER 1 General Description

CHAPTER 1 GENERAL DESCRIPTION

I. FEATURES

1. High Speed Scanning

Various-sized papers, from name cards or checks up to A3, can be scanned at high speed.

DR-9080C (Color, Grayscale, Binary)

DR-6080 (Grayscale, Binary)

50ppm (A4, 200 dpi, Color)
90ppm (A4, 200 dpi, Grayscale)
90ppm (A4, 200 dpi, Binary)

60ppm (A4, 200 dpi, Grayscale)
60ppm (A4, 200 dpi, Binary)

2. High

Durability

The unit is designed for a lifetime of up to 6 million sheets.

3. Easy

Maintenance

Replacing the rollers, including the pick-up roller, feed roller and retard roller, can be handled by the
user.

4. New

Functions

New functions such as staple detection and double feed detection by ultrasonic are available.

Fig. 1-101

Windows

is a registered trademark of Microsoft Corporation in the U.S. and other countries.

Other company names and product names mentioned in this manual are registered trademarks or
trademarks of the respective companies.

Summary of Contents for ImageFormula DR-9080C
































































































































































































































































































































































Search results

Summary of Contents for ImageFormula DR-9080C

Reviews:

Related manuals for ImageFormula DR-9080C

Brands by name

Popular brands

Canon ImageFormula DR-9080C, Service Manual

Search results

Summary of Contents for ImageFormula DR-9080C

Reviews:

Related manuals for ImageFormula DR-9080C

Brands by name

Popular brands