3 - 14
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) After removing six gears
, remove two
screws
and the connector
, and
dismount the document tray motor
.
Gear
Screw
Connector
Document tray motor
Fig. 3-205
Precautions during assembly
•
When installing the document tray driving unit
into the main body, be careful with the
positioning. Refer to the section entitled
"Document tray front cover".
•
Make sure that the reinforcing plate is lowered
to the bottom before the installation.
Fig. 3-206
3. Pick-up
motor
1) Detach the front delivery cover.
2) Remove one screw A
and four screws B
(self-tapping)
.
Screw A
Screw B
Fig. 3-207
Summary of Contents for ImageFormula DR-9080C
