CHAPTER 1 GENERAL DESCRIPTION
2. Scanning
This section describes how to scan
using [Scan First] in CaptureOnTouch in
Windows OS.
Note:
CaptureOnTouch is TWAIN compatible
application software.
1) Start CaptureOnTouch.
Double-click the CaptureOnTouch icon in
the task bar to start CaptureOnTouch.
Figure 1-308
2) When the main screen is displayed, click
[Scan First].
Note:
Since [Scan First] is enabled by
default, this operation is not required.
Figure 1-309
3)
Change the [Enable continuous
scanning] and [Scans in the full auto
mode] settings as needed.
Note:
In this example, set [Enable continuous
scanning: OFF] and [Scans in the full
auto mode: ON].
Figure 1-310
4) Click the Start button to start the scan.
Figure 1-311
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-C125 FIRST EDITION
1-9
