9-2
Chapter 9 Job Registration Tool Settings
1.
Before Use
The Job Registration Tool is an application for registering jobs that can be executed from the [Job] key on the control panel. This
chapter describes the settings for the Job Registration Tool. For details on the Job Function, see
“About the Job Function” on p. 3-13
Job Function
The job function is for using the [Job] key on the control panel
to select and execute jobs registered by Job Registration Tool,
and to implement scans.
Hint
• Job registration stores scanning condition settings, image file
format selection, save destination and image data processing
settings for each job to be used with the Job Function.
• Up to 99 jobs can be registered with the Job Registration Tool.
Starting the Job Registration Tool
Follow the procedure below to start the Job Registration Tool.
1.
Click the [Start] button, and then click [All Programs]
- [Canon DR-XXXX] - [Job Registration Tool]. (XXXX
varies depending on the model you are using)
Hint
In Windows 8, the job registration tool is saved to the following
location.
The Job Registration Tool starts.
