4-8
Chapter 4 Other Functions
■
USB Short Packet Setting
If the scanner does not operate normally when using the
USB interface, change this setting to [OFF].
■
Tray Position Setting
The document feed tray should be set to fit the number of
document sheets to be loaded.
Document Feed Tray” on p. 3-5.)
0:
Up to 500 sheets
1:
Up to 300 sheets
2:
Up to 100 sheets
■
Key Repeat Setting
Selects the panel display method.
ON:
The panel display scrolls continuously while a key is
pressed.
OFF:
The panel display scrolls each time a key is pressed.
Hint
Key repeat is valid in the following situations.
• When using the Job Function
• When selecting each of the functions in the User Mode
■
Total Counter
Displays the lifetime total number of document pages fed
by the scanner.
■
Roller Counter
Displays the number of document pages fed since roller
installation or replacement (pickup, feed, and retard
rollers). Make sure to reset this counter when replacing the
rollers.
(See “Checking and Resetting the Page Counter”
■
Imprinter Test
When the optional imprinter is installed, this function
executes a test printing of the imprinter.
an Imprinter Test” on p. 5-20.)
■
Auto power OFF function settings
Set the auto power OFF function.
Select ON to enable the auto power OFF function, and if
after 4 hours of inactivity, the power turns OFF
automatically.
