3-5
Chapter 3 Basic Operation
2.
Document Feed and Eject Trays
Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.
Preparing the Document Feed Tray
■
Document Feed Tray
The height of the Document Feed Tray can be adjusted
according to the number of document pages to be loaded
(the default setting is the lowest position).
Tray Position Setting
The proper height of the Document Feed Tray can be set in
advance by the Tray Position in the User Mode setting,
which minimizes the time required to start feeding the
documents to be placed on the Document Feed Tray.
1.
Press the Menu key on the control panel.
The User Mode is activated.
2.
Press the [
] key five times to display Tray Position.
3.
Confirm your settings.
[0]:
To load up to 500 sheets
[1]:
To load up to 300 sheets
[2]:
To load up to 100 sheets
Menu Key
