3-20
Chapter 3 Basic Operation
■
Patchcode Pattern Function
There are two types of patchcodes, and their function
changes according to their pattern.
PATCH T
When the scanner recognizes this patchcode printed on a
patchcode sheet, it creates a separate file for the document
that comes after the patchcode sheet. The image of this
sheet is saved or not saved, depending on the application’s
settings.
PATCH II
When the scanner recognizes this patchcode printed on a
patchcode sheet, it creates a separate file starting from the
patchcode sheet. The image of this sheet is saved,
regardless of the application’s settings.
How to Use Patchcode Sheets
This section describes how to use patchcode sheets with
CapturePerfect 3.1.
1.
Print the patchcode sheets on a printer.
IMPORTANT
• Print (at original size) PATCH T (A4) and PATCH II (A4)
sheets on A4 paper, or PATCH T (LTR) and PATCH II (LTR)
on LTR paper.
• The scanner may not recognize the patchcodes if they are
enlarged or reduced.
2.
Insert the patchcode sheet in front of the document
that you want to save as a separate file before
placing the documents on the scanner.
3.
On the [Others] tab of the ISIS driver properties,
select [Patchcode] from the Batch Separation drop-
down list.
Insert patchcode sheets in front of
the documents you want to save as
separate files.
