157
2
Finely adjust the carriage position by moving it left or
right, then make sure you can feel it click in.
Hint
• If you do not feel it click in, the carriage is not aligned correctly
with a positioning hole. Always move the carriage to a position
where it clicks in.
• The imprinter cover will not close unless the carriage is correctly
aligned with a positioning hole. If it will not close, check the
position of the carriage.
Cleaning the Imprinter
Cleaning the Guide Plate
Ink that collects on the guide plate inside the optional imprinter may
stain the documents when they are scanned. Clean off the ink with
water and a mild detergent on a soft cloth that has been firmly wrung-
out, and then thoroughly dry it with a dry cloth.
Positioning holes (13 places)
Guide Plate
