20
Before Using the Scanner
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
●
Provide adequate space around the scanner for operation,
maintenance, and ventilation.
●
Avoid installing the machine in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
●
Avoid locations where a considerable amount of dust accumulates
as dust may adversely affect the inside of the scanner. Avoid warm
or humid locations, such as in the vicinity of a water faucet, water
heater, or humidifier.
●
Avoid locations where ammonia gas is emitted. Avoid locations
near volatile or flammable materials, such as alcohol or paint
thinner.
●
Avoid locations that are subject to vibration.
●
Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 35 °C (50 °F to 95 °F)
Humidity: 20% to 80% RH
●
Avoid installing the scanner near equipment that generates a
magnetic field (e.g. speakers, televisions, or radios.)
At least100 mm (3.9")
At
le
as
t 8
5
7
mm
(3
3.7
")
At
l
e
a
s
t 69
9 mm
(2
7
.5")
