48
Setting with User Mode
The continuous manual feeding mode can be enabled and disabled in
the User Mode.
To make this setting in the User Mode, first allow it by the Canon
imageFORMULA Driver Setting Tool.
1
Press the Menu key on the operation panel.
User Mode is activated.
"User Mode Operations" (See p. 61)
2
Press the
▲▼
keys to select [Scan Setting], and press
[OK].
The scan setting items are displayed.
3
Press the
▲▼
keys to select [Manual Feed], and press
[OK].
The continuous manual feed setting items are displayed.
4
Press the
▲▼
keys to select [On/Off], and press [OK].
5
Confirm the settings.
[On]
: Disables the Pickup Roller so that loaded documents must
be hand fed for transport by the Feed Roller one page at a time.
[Off]
: Documents are fed continuously by the Pickup Roller unless
the ordinary manual feeding mode is enabled.
6
Press the
▲▼
keys to select, and press [OK] to accept.
7
Press the Menu key to return to the original screen.
Scanning Documents Larger than A3
Folio Scan enables you to scan documents that are larger than A3 and
therefore do not fit in the feeder. To use the function, fold the
document in half lengthwise and place it into the feeder. The scanner
will scan both sides and combine the scanned images into a single
image.
1
Open the scanner driver's setting screen.
2
Set [Page Size] on the [Basic] tab to a size that is half that
of the paper to be actually scanned, and set [Scanning
Side] to [Folio]. For example, when scanning a document
of A2 size folded, set [Page Size] to [A3].
