83
5
To check the scanned image, click the [Finish] button.
To edit scan images,
see "Operations for the scanned image edit
Click the
button to edit the output settings.
"Setting the Output" (See p. 98)
Click the [Cancel] button to discard the scanned image and return
to the main window.
When the output has finished, a popup window will be displayed.
If saving the scanned image, a link to open the save destination
folder will be displayed.
This completes the Standard Scanning.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.
Scanning Shortcut
Operations;
Register shortcut
Scan documents
Image output
By registering favorite combinations of frequently used document
selections and output methods as scanning shortcuts, you can scan
just by clicking the Scanning Shortcut panel.
Hint
If a registered scanning shortcut is assigned as a job, you can run
shortcut scans using these settings by pressing the scanner start
button.