90
Hint
If [Edit after scanning] is disabled in the scanning shortcut
settings, the edit window will not be displayed.
Click the
button to edit the output settings.
Click the [Cancel] button to discard the scanned image and
return to the main window.
When the output has finished, a popup window will be displayed.
If saving the scanned image, a link to open the save destination
folder will be displayed.
This completes the shortcut scans.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.
Scan by pressing the start button
If you set frequently-used scans to the scanning shortcuts and assign
them as jobs, you can run shortcut scans from the operation panel.
Load the documents, press the Job key, and use the
▲▼
keys to
select the job you want to execute. When you press the Start button,
CaptureOnTouch starts up and scanning begins.
Hint
• If the [Do not display the main screen when the scan is started with
the scanner button] checkbox is enabled in the Environmental
settings, the main CaptureOnTouch window will not be displayed
when a scan is started from the start button. Only dialog boxes and
error messages during scanning, and completion popup windows
are displayed.
• If the [Do not display the main screen when the scan is started with
the scanner button] checkbox is enabled in the Environmental
settings, [Enable additional scan] and [Edit after scanning] will be
disabled when scanning is started from the start button.
Start Key
▲▼
Keys
