CHAPTER 5 TROUBLESHOOTING
4. Sleep
5. Counter
This mode is used to change the time
before entering sleep mode. This is set to
[After 10 mins.] by factory default.
This mode is used to check the number
of pages fed and the number of paper jams,
and to record the number of sheets fed when
changing consumable parts. These setting
values can also be changed.
This setting can be changed depending
on the user usage conditions. If you change
this setting, notify the user that you are
changing it.
Select [Counter] from the main menu
screen to display the change counter screen.
The screen and list of items is shown below.
Select [Sleep] from the main menu
screen to display the setting screen. In
addition to [After 10 mins.], you can also
choose from [After 1 hour.] and [After 4
hour.]. Change the setting as necessary and
select the [OK] button.
The value of the [Total Count] is
displayed at the bottom of the main menu
screen.
Figure 5-221
Figure 5-222
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
5-13
