29
6
Place the document as described in the
procedure
.
Hint
• When scanning multiple page documents that are fastened
together, such as invoices, select the [Non Separation Feeding
Mode] check box in step 4. Also, it is recommended to place
the documents in the scanner one at a time with the edge that
is fastened together facing down.
• When scanning documents of thin paper, the scanned
documents may not be ejected neatly onto the document eject
tray. When scanning such documents, open the eject tray
support.
Placing Cards
When scanning cards, switch the scanner to Bypass mode and then
place one card at a time horizontally.
1
Switch the scanner to Bypass mode.
2
Adjust the document guides to fit the width of the card to
be scanned.
3
Place the card horizontally, with the reverse side facing
you, and the top of the card facing down.
CAUTION
• Place the cards one at a time.
• When scanning cards, place them to be fed horizontally. If you
place cards to be fed vertically, they may not be ejected properly,
and cards that get jammed may be damaged when you remove
them.
Hint
Up to 3 cards can be placed in the scanner at the same time if they
are not embossed. In such a case, turn off Bypass mode before
scanning.
