30
Placing Folded Documents
Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. (The maximum size is 11" X
17"/A3.) To use the function, fold the document in half lengthwise and
place it into the feeder. The DR-M160 will scan both sides and
combine the scanned images into a single image.
1
2
Open the settings screen for the scanner driver.
3
Set [Page Size] on the [Basic] tab to a size that is half that
of the paper to be actually scanned, and set [Scanning
Side] to [Folio].
For example, when scanning a document of A3 size folded, set
[Page Size] to [A4].
4
Open the [Feeding] tab.
5
Select the [Non Separation Feeding Mode] check box.
6
Click the [OK] button to close the settings screen.
7
Fold the document in half.
Crease the document firmly down its center to fold the document
in half. Fold the document so that its edges are neatly aligned. If
the document is not folded properly, paper jams may occur or
distortions may appear in the combined scanned image.
IMPORTANT
A portion of the scanned image will be missing at the fold line.
