38
Detecting Skewed Documents
This scanner includes a function that can detect when a document
has been fed at a slant. When this function is used, the scanner will
stop a scanning operation automatically when it detects a skewed
document that exceeds a fixed angle, thereby preventing damage to
the document. In addition to skewed documents, this function also
detects stapled documents. This function is useful for documents that
are 148 mm (5.83") or larger in width. To use the skew detection
function, open the scanner driver settings screen and enable the
skew detection function beforehand.
Setting procedure
1
Opens the scanner driver's Detail Settings screen.
2
Open the [Error Detection] Tab.
3
Select the [Skew Detection] check box.
4
Click the [OK] button to close the settings screen.
5
Place the document as described in the
IMPORTANT
When this function is enabled, small documents and documents
that have been placed to the left or right of the center of the feed
inlet may be detected as skewed, and the scanning operation
may stop. Place documents in the center of the feed inlet, or
disable the skew detection function.
