30
Scanning Procedure
1
Set the Auto Start switch at the rear panel of the scanner to ON and
then connect the scanner to the computer.
2
Open the feed tray, turn ON the scanner, and then load the document.
For details, "Loading a document".
When you open the feed tray, the Start button on the scanner lights and the
auto play screen appears.
If you are using Windows XP and you set the Auto Start switch to ON
before connecting the scanner to the computer, a message requesting
that you restart your computer may appear when you turn ON the scanner.
You can continue normal use even if you click [No] and do not restart the
computer.
1
Click [Open folder to view files].
CaptureOnTouch Lite starts, and the main screen appears.
Do not close the feed tray before the main screen of CaptureOnTouch Lite
appears.
The [AutoPlay] screen may not appear in some operating
environments. In such cases, open the [ONTOUCHLITE] drive in
Windows Explorer, for example, and start the application
directly by double-clicking [ONTOUCHL.exe].
Depending on your operating system, the drive name may not
be [ONTOUCHLITE]. Open the drive on which [ONTOUCHL.exe]
is located, and start the application directly.
Depending on your operating system, [CaptureOnTouch Lite]
may appear in the [AutoPlay] screen. In such cases, double-click
[CaptureOnTouch Lite] to start CaptureOnTouch Lite.
