5-8
COPYRIGHT © CANON ELECTRONICS INC. 2012
CANON P-208 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
9) If you select [Select Scanner], the scan-
ner selection screen is displayed to select
the connected scanner.
For DR-P208_P-208.DLL only
When there are other DLLs
Figure 5-205
10) The Information screen appears.
Figure 5-206
Note:
Do not run any other application
software such as CaptureOnTouch or
turn off the machine while the service
tool is running. If the tool becomes
unresponsive, you should restart the
computer.
Note:
If "Connect" is selected before com-
pleting scanner recognition, the "No
devices found." screen below appears.
Select "Retry" in a few seconds.
The " No devices found." screen also
appears if the scanner is not operated
correctly, such as if it is not turned on.
Check the operation procedure.
Figure 5-207