5-12
COPYRIGHT © CANON ELECTRONICS INC. 2012
CANON P-208 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
After entry, select the [Apply] button on
the information screen and save the values.
If the [Cancel] button is selected on the
information screen, the changed values are
not saved.
Figure 5-215
4. Counter
This mode is used to display or change
the scanning count and the number of
document jams.
Note:
Do not change the value of each item
by mistake. Change it only if neces-
sary.
Figure 5-216
Display Details
Total
Total scanning count
Jam
1
Number of documents
jams in the pickup section
Pickup delay jam (pickup
error) count
Jam
2
Number of documents
jams in the registration
section
Residual jam count
Replacement 1
Replacement 2
Replacement 3
Replacement 1 to Re-
placement 3 are used by
the service technicians to
manually input the total
number of sheets fed
when replacing a part to
serve as a rough guide
until the next replacement.
The corresponding parts
can be decided within
each local region or by the
service technicians as
necessary.
Table 5-202