5-30
COPYRIGHT © CANON ELECTRONICS INC. 2012
CANON P-208 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Operation Procedure
1) Place the document.
2) When the Scan button is clicked, a
scanner setting dialog in the driver ap-
pears. Set the scanner properly and click
the "OK" button.
Figure 5-259
3) The screen for saving scanned images is
displayed. Set a save location and click
the "Save" button. The scanned image is
saved in bitmap form.
4) The document is scanned.
5) The data is saved and the image is dis-
played as well. If only one sheet is
scanned, the front surface is displayed in
"Image 1" and the back surface is dis-
played in "Image 2".
If multiple sheets are scanned, the last
document image is displayed in "Image 2",
and the last scanned image but one is
displayed in "Image 1".
G Other Functions
1. Recovery of Log Files
The software for this machine collects
log files of user usage status information,
and is equipped with a function for recov-
ering these log files.
Since the log files are designed to be
useful for resolving problems, the user may
be asked to do the operation to recover the
files.
The following gives an overview of the
log files and the procedure for recovering
them.
Types of information
1) User operations
2) Error
3) Settings
4) Debugging (note that this excludes de-
fault settings)
5) Latest information when recovering the
files
Recovery procedure (refer to Figure
5-259)
1) Open the Advanced screen for the
scanner, and click the [About] button.
2) Click the [Log File Settings] button in the
About screen.
3) Click the [Execute] button in the Log File
Settings screen.
4) The Save Settings screen is displayed. Select
the appropriate location to save the files.
5) The files are saved with [xxx.dat] at-
tached.
