COPYRIGHT © CANON ELECTRONICS INC. 2011
CANON P-215 FIRST EDITION
3-9
CHAPTER 3 DISASSEMBLY & REASSEMBLY
III. BASE UNIT
1. Control PCB
1) Remove the rear cover.
2) Remove the upper unit.
3) Remove the 2 cables
{
2
connected with
the control PCB
{
1
. And remove 3 screws
{
3
(M3x4) and while escaping the control
PCB from the fitting parts
{
4
, remove the
control PCB.
Note:
Capacitors are mounted on the rear
side of the place [A] indicated by the
broken line. While disassembling, pick
the control PCB without hitting of the
capacitors.
Figure 3-301
4) Pull the switch slide plate
{
1
out from the
switch.
Figure 3-302
Notes on assembling
Before installing the PCB, install the switch
slide plate on the PCB.