55
Chapter 7 Regular Maintenance
Clean the scanner and perform maintenance on a regular basis as
described below to maintain peak scanning quality.
Cleaning the Scanner ......................................................................... 55
Cleaning the Scanning Glass and the Rollers ................................. 56
When cleaning the outside and inside of the scanner, turn the power
OFF and disconnect the USB cable from the computer.
Do not use spray cleaners to clean the scanner. Precision
mechanisms, such as the light source, may get wet, and cause a
malfunction.
Never use paint thinner, alcohol, or other organic solvents to clean
the scanner. Such solvents can damage or discolor the exterior of the
scanner, or create a risk of fire or electrical shock.
Cleaning the Scanner
To clean the exterior of the scanner, dampen a cloth with water or a
mild detergent, wring the cloth out thoroughly, and then wipe the dirt
away. Then use a dry, soft cloth to wipe away any moisture.
Do not use a coarse cloth or dirty cloth because it may result in
scratches.
Cleaning the Inside of the Scanner
Dust or paper particles inside the scanner may cause lines or smudges to
appear on scanned images. Use compressed air to periodically clean dust
and paper particles from the document feed opening and the inside of the
scanner. After finishing a large scanning job, turn OFF the scanner and
then clean out any paper particles remaining inside the scanner.
Summary of Contents for ImageFormula R10
Page 72: ...72 External Dimensions ...
