5-30
Chapter 5 Operating Procedures
Hint
• The initial value for the Skip Blank Page option is set to “90.”
• As you lower the value from the default setting, pages of the
document with text become more likely to be skipped as well.
• As you raise the value from the default setting, pages of the
document that are blank become less likely to be skipped.
IMPORTANT
• As you lower the Skip Blank Page value from the default
setting, it is then set so that pages of the document with text
are more likely to be skipped.
• As you raise the Skip Blank Page value from the default
setting, it is then set so that blank pages of the document are
less likely to be skipped.
Document orientation
Rotates the scanned image a specified amount.
Hint
If you select [Auto], the orientation of text within the document is
detected and the image is rotated so that the orientation of the
text is correct.
IMPORTANT
The scanning speed may be reduced when [Auto] is selected.
Deskew
The scanner detects from the scanned image that the
document was fed askew and then straightens the image.
• Prefer Quality
Image processing is performed to minimize the loss of
quality of an image that has deteriorated as result of
deskewing.
• Prefer Speed
The image deteriorates slightly as a result of deskewing.
IMPORTANT
If you select [Prefer Quality], the scanning speed is reduced. If
you are scanning a large number of pages, select [Prefer
Speed] to prevent a decrease in scanning speed.
Bleed-through reduction
Eliminates bleed-through images, in which images on the
reverse side of a scanned document appear on the scanned
page, such as when scanning thin documents with text or
images on both sides.
IMPORTANT
Bleed-through reduction cannot be set when the [Text enhance]
mode is selected.
