5
11) Mount a cable clamp [1] 4 pieces packaged with
the product.
12) Using the communications cable [1], connect the
open I/F PCB and the unit.
13) Using the cross Ethernet cable [1], connect the
unit and the host machine.
Note:
When the cross Ethernet cable [1] is connected, the
position of connected port is noted.
For the unit, there are two connected connectors for
Ethernet.
The connector for the cross Ethernet cable [1] is at a
position far from the USB port.
The connector that becomes it next to the USB port is
for the network.
Do not connect connector the cross Ethernet cable [1]
that becomes it next to the USB port.
[1]
[1]
[2]
[1]
[1]
