8
8
8-442
8-442
Service Mode > SORTER > ADJUST
Service Mode > SORTER > ADJUST
SORTER> ADJUST
SBRL-MTR
Swbk rollr up/down motr pstn adj: P bndr
Lv.1 Details
To adjust the home position of switchback roller up/down motor in the
perfect binder.
A distance between the stacking tray and switchback roller is to be 3
to 4 mm.
As the input value is changed by 1, the home position is increased/
decreased by 0.25 mm.
+: Decrease
: Increase
Use case
• At the paper stack alignment failure in feeding direction or the
missing page occurrence
• When the position is changed back to the factory adjustment value
at the EEPROM/master controller PCB replacement
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range
-9 to 9
Unit
0.25 mm
Default value
0
BFR-UPA4
Adj Swng Roll rising tmg for A4: Fin-AG
Lv.1 Details
To adjust the Swing Roller rise timing when A4 size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case
When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
BFR-UPB5
Adj Swng Roll rising tmg for B5: Fin-AG
Lv.1 Details
To adjust the Swing Roller rise timing when B5 size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case
When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
SORTER> ADJUST
BFR-UPLT
Adj Swng Roll rising tmg for LTR: Fin-AG
Lv.1 Details
To adjust the Swing Roller rise timing when LTR size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case
When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
RTR-DWA4
Adj Ppr Rtn Roll fall tmg (A4): Fin-AG
Lv.1 Details
To adjust the Paper Return Roller fall timing when A4 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case
When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
RTR-DWB5
Adj Ppr Rtn Roll fall tmg (B5): Fin-AG
Lv.1 Details
To adjust the Paper Return Roller fall timing when B5 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case
When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
RTR-DWLT
Adj Ppr Rtn Roll fall tmg (LTR): Fin-AG
Lv.1 Details
To adjust the Paper Return Roller fall timing when LTR size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case
When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 50
Unit
1 msec
Summary of Contents for imagePRESS 1110
Page 242: ...3 3 Periodical Service Periodical Service Periodical service item ...
Page 655: ...5 5 Adjustment Adjustment Overview When replacing parts Major adjustment ...
Page 944: ...8 8 Service Mode Service Mode Overview COPIER FEEDER SORTER BOARD Situation Mode ...
Page 1555: ... Service Tools General Circuit Diagram General Timing Chart Operator Maintenance Appendix ...
