manualshive.com logo in svg

Canon imagePRESS 1110, Service Manual

The Canon imagePRESS 1110 is a high-performance printing machine designed for professional use. For easy maintenance and troubleshooting, make sure to download the free Service Manual from our website. This manual provides comprehensive instructions and detailed information to keep your imagePRESS 1110 running smoothly.

Share
Download
background image

6

6

6-15

6-15

Troubleshooting > Image Faults > Points to note when using the pre-printed paper > When using the paper printed in the offset printer: 

Troubleshooting > Image Faults > Points to note when using the pre-printed paper > When using the paper printed in the offset printer: 

Points to note when using the pre-printed paper

Take note of the followings when using the pre-printed paper on imagePRESS 1135+.
Use of pre-printed paper may shorten the life of parts or may shorten the cleaning interval. 
Thus, explain it to customers beforehand.
When using pre-printed paper, understand the type of used ink and whether the spray powder 
is used or not, and tell customers theoptimal operations according to the conditions.
Also, note that use of pre-printed paper requires the operations other than the normal service 
maintenance works.

 

■ When using the paper printed in the offset printer: 

 

● Measure against the troubles due to the paper ink

<Regarding the paper ink>

The ink used for the offset print may contain the materials (solvent or wax) that possibly 
softens or fuses because of high temperature. Since the temperature at fixing on the host 
machine reaches approx. 200 deg C, if the paper with those types of ink is used, the ink 
adheres to the fixing assembly etc. on the host machine and output paper may get dirt or 
parts life may be shortened. To prevent the ink from fusing, instruct customers to use the 
paper with oil-based (oxidation polymerization dry) ink that is highly heat-resistance or 
ultraviolet curable ink used. 
When the toner is printed onto the pre-printed paper, it influences the fixing performance and 
output paper may get dirt due to the unfixed toner (especially on the coated paper) or mottled 
image called moire may appear due to the screen ruling. If this symptom occurs, follow the 
instruction below and take an appropriate action. 

<Print condition> 

•  Use the paper with oil-based* (oxidation polymerization dry) ink that is highly temperature 

resistance or ultraviolet curable ink used.
It is recommended to tell the usage application when ordering the print materials and ask to 
select the high heat-resistance toner. 
* The ink contains less solvent is high heat-resistance. 

•  Make sure to dry out the pre-printed paper completely (72 hours or more) before use it.

<Host machine setting>

A. If the ink is fused:

* It is better to print with ink that does not fuse.
Lower the fixing temperature on the screen: [Settings/registration > System 
Management Settings > Device Settings > Adjust Fixing of Paper Sources]. Select: 
COPIER>OPTION>DSPLY-SW>IMGC-ADJ and set it to "1".
Since fixing performance may decline depending on this setting, change in stages.

B. If the toner comes off at the area where ink has already been printed.

* Basically, prevent to print the toner onto the ink.
Select "Fixing Priority" on the screen: [Settings/registration > System Management Settings 
> Device Settings > Adjust Fixing of Paper Sources].
However, when the coated paper is used and the toner is printed onto the area where 
the ink density is high, the toner tends to come off. In this case, either prevent to use the 
coated paper or prevent to print the toner onto the ink. 

If the toner still comes off, try to lower the density of ink where the toner comes off or lower 
the toner density. This may fix the symptom. 

F-6-13

F-6-14

Summary of Contents for imagePRESS 1110




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePRESS 1110

Ricoh FW780 Operating Instructions Manual preview
FW780
Brand: Ricoh Pages: 97
Xerox Copy Centre 518 Specifications preview
Copy Centre 518
Brand: Xerox Pages: 2
Ricoh FW740 Operating Instructions Manual preview
FW740
Brand: Ricoh Pages: 96
Ricoh FW870 User Manual preview
FW870
Brand: Ricoh Pages: 206
Ricoh FW 810 Service Manual preview
FW 810
Brand: Ricoh Pages: 170
Ricoh Business Pro 1200 Operating Instructions Manual preview
Business Pro 1200
Brand: Ricoh Pages: 81
Ricoh FT4422 Operating Instructions Manual preview
FT4422
Brand: Ricoh Pages: 108
Ricoh FW830 Service Manual preview
FW830
Brand: Ricoh Pages: 227
Ricoh FT5034 Service Manual preview
FT5034
Brand: Ricoh Pages: 139
Ricoh G176 Service Manual preview
G176
Brand: Ricoh Pages: 294
Ricoh TH-C1b Service Manual preview
TH-C1b
Brand: Ricoh Pages: 433
Ricoh FT7060 Field Service Manual preview
FT7060
Brand: Ricoh Pages: 569
Ricoh FT8880 Service Manual preview
FT8880
Brand: Ricoh Pages: 608
Ricoh B286 Service Manual preview
B286
Brand: Ricoh Pages: 622
Ricoh FT5580 Service Manual preview
FT5580
Brand: Ricoh Pages: 522
Ricoh FT7770 Service Manual preview
FT7770
Brand: Ricoh Pages: 1024
Ricoh D017 Service Manual preview
D017
Brand: Ricoh Pages: 1271

Brands by name

Popular brands

Load more brands