Canon imagePRESS 1110 Service Manual Download

Page: 794 / 1603

7-62

Error Code > Error Code > Error Code Details

Code

Detail

Code

Location

Item

Description

E580 8017 51

Title

Error in lock of stack tray up/down motor 1 (M20) of the

stacker

Description

of detection

In the case that the arm is at the mechanical lower-limit

position (without dolly, with delivery position tray, with the lifter

upper tray, the delivery position is at lower limit), although

turning ON of stack tray 1 full level sensor (S18) triggers to

stop rising of the stack tray, it failed to be ON even though 30

sec has passed.

Measures 1. Replace the stack tray 1 full level sensor (S18).

2. Replace the stack tray up/down motor 1 (M20).

3. Replace the slave controller PCB.

E580 8017 52

Title

Error in lock of stack tray up/down motor 1 (M20) of the 2nd

stacker

Description

of detection

In the case that the arm is at the mechanical lower-limit

position (without dolly, with delivery position tray, with the lifter

upper tray, the delivery position is at lower limit), although

turning ON of stack tray 1 full level sensor (S18) triggers to

stop rising of the stack tray, it failed to be ON even though 30

sec has passed.

Measures 1. Replace the stack tray 1 full level sensor (S18).

2. Replace the stack tray up/down motor 1 (M20).

3. Replace the slave controller PCB.

E580 8018 51

Title

Error in stack tray up/down motor of the stacker

Description

of detection

With any operation other than removal-opening operation,

the front cover was detected open during the job or removal

lowering/rising.

Measures 1. Replace the front cover open/close sensor (S52).

2. Replace the stack tray up/down motor 1 (M20) or stack tray

up/down motor 2 (M19).

3. Replace the slave controller PCB.

4. Replace the master controller PCB.

E580 8018 52

Title

Error in stack tray up/down motor of the 2nd stacker

Description

of detection

With any operation other than removal-opening operation,

the front cover was detected open during the job or removal

lowering/rising.

Measures 1. Replace the front cover open/close sensor (S52).

2. Replace the stack tray up/down motor 1 (M20) or stack tray

up/down motor 2 (M19).

3. Replace the slave controller PCB.

4. Replace the master controller PCB.

Code

Detail

Code

Location

Item

Description

E580 8021 51

Title

Error in lock of stack tray up/down motor 2 (M19) of the

stacker

Description

of detection

In the case that stack tray 2 full level sensor (S23) and arm

escape sensor 2 (S24) are ON, although turning ON of stack

tray 2 full level sensor (S23) triggers to stop lowering of the

stack tray, it failed to be OFF even though 30 sec has passed.

Measures 1. Check the connector of arm escape sensor 2 (S24), and

replace the sensor if necessary.

2. Replace the stack tray up/down motor 2 (M19).

3. Replace the slave controller PCB.

E580 8021 52

Title

Error in lock of stack tray up/down motor 2 (M19) of the 2nd

stacker

Description

of detection

In the case that stack tray 2 full level sensor (S23) and arm

escape sensor 2 (S24) are ON, although turning ON of stack

tray 2 full level sensor (S23) triggers to stop lowering of the

stack tray, it failed to be OFF even though 30 sec has passed.

Measures 1. Check the connector of arm escape sensor 2 (S24), and

replace the sensor if necessary.

2. Replace the stack tray up/down motor 2 (M19).

3. Replace the slave controller PCB.

E580 8022 51

Title

Error in lock of stack tray up/down motor 2 (M19) of the

stacker

Description

of detection

In the case that stack tray 2 full level sensor (S23) is ON

while arm escape sensor 2 (S24) is OFF, although turning ON

of arm escape sensor 2 (S24) triggers to stop lowering of the

stack tray it failed to be ON even though 30 sec has passed.

Measures 1. Check the connector of the arm escape sensor 2 (S24),

and replace the sensor if necessary.

2. Replace the stack tray up/down motor 1 (M20).

3. Replace the slave controller PCB.

E580 8022 52

Title

Error in lock of stack tray up/down motor 2 (M19) of the 2nd

stacker

Description

of detection

In the case that stack tray 2 full level sensor (S23) is ON

while arm escape sensor 2 (S24) is OFF, although turning ON

of arm escape sensor 2 (S24) triggers to stop lowering of the

stack tray it failed to be ON even though 30 sec has passed.

Measures 1. Check the connector of the arm escape sensor 2 (S24),

and replace the sensor if necessary.

2. Replace the stack tray up/down motor 1 (M20).

3. Replace the slave controller PCB.

Summary of Contents for imagePRESS 1110




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands

Canon imagePRESS 1110, Service Manual

Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands