manualshive.com logo in svg

Canon imagePRESS C1, Service Manual

The Canon imagePRESS C1 is an innovative digital printing system designed for exceptional color accuracy and print quality. To maximize your experience with this product, we provide a comprehensive user manual, available for free download at 88.208.23.73:8080. Unlock the full potential of your Canon imagePRESS C1 with our user manual.

Share
Download
background image

Chapter 15  

15-28

0049

1st sheet delivery stationary 
2

PI13,S9

When delivery stationary 2 (0009) occurs on the 1st sheet.

0050

1st sheet pre-reverse delay 1 S3

When pre-reverse delay 1 (0010) occurs on the 1st sheet.

0051

1st sheet pre-reverse delay 2 S1,S3

When pre-reverse delay 2 (0011) occurs on the 1st sheet.

0052

1st sheet pre-reverse delay 3 PI4

When pre-reverse delay 3 (0012) occurs on the 1st sheet.

0053

1st sheet pre-reverse 
stationary 1

S1,S4

When pre-reverse stationary 1 (0013) occurs on the 1st sheet.

0054

1st sheet pre-reverse 
stationary 2

S2,S4

When pre-reverse stationary 2 (0014) occurs on the 1st sheet.

0055

1st sheet pre-reverse 
stationary 3

S2,S3

When pre-reverse stationary 3 (0015) occurs on the 1st sheet.

0056

1st sheet pre-reverse 
stationary 4

S1,S3

When pre-reverse stationary 4 (0016) occurs on the 1st sheet.

0057

1st sheet pre-reverse pickup 
delay 

S1

When pre-reverse pickup delay (0017) occurs on the 1st sheet.

0058

1st sheet pre-reverse pickup 
stationary 1

S1,PI4

When pre-reverse pickup stationary 1 (0018) occurs on the 1st sheet.

0059

1st sheet pre-reverse pickup 
stationary 22

S1,PI4

When pre-reverse pickup stationary 2 (0019) occurs on the 1st sheet.

0060

1st sheet reverse pickup 
delay

S2

When reverse pickup delay (0020) occurs on the 1st sheet.

0061

1st sheet reverse pickup 
stationary

S2

When reverse pickup stationary (0021) occurs on the 1st sheet.

0062

1st sheet pickup leading edge 
skew

S4,S5

When pickup leading edge skew (0022) occurs on the 1st sheet.

0063

1st sheet pickup trailing edge 
skew

S4,S5

When pickup trailing edge skew (0023) occurs on the 1st sheet.

0064

1st sheet pickup NG 1

S1

When pickup NG 1 (0024) occurs on the 1st sheet.

0065

1st sheet pickup NG 2

S3,S2

When pickup NG 2 (0025) occurs on the 1st sheet.

0066

1st sheet reverse pickup 
trailing edge skew

S4,S5

When reverse pickup trailing edge skew (0026) occurs on the 1st sheet.

0067

1st sheet reverse pickup NG 
1

PI4

When reverse pickup NG 1 (0027) occurs on the 1st sheet.

0071

Timing error 1

-

Beyond control of software

0072

Timing error 2

-

When a previous document has yet to be delivered while a scanned document is moved to the right side 
of the platen roller during the fixed reading.

0073

Illegal size

S3

When the registration roller rear sensor detects a document after it is fed by a specified amount (30mm) 
from the waiting position during the LDR stream reading.

0074

Manual feed document size 
error

S9,S1

When the reverse sensor detects a document while the multifeed registration roller sensor is detecting it 
during the multifeed pickup operation. 

0075

Image start position error

S7

When the reading position is not changed in response to a reading position change request during the 
stream reading.

0076

1st sheet image start position 
error

S7

When image start position error (0075) occurs on the 1st sheet.

0077

Belt speed setting error

PI1

When the specified speed of the belt motor is less than the minimum speed (100 mm/s) or more than the 
maximum speed (700 mm/s).

0078

Belt speed switch error

PI1

When the belt motor is not in the normal speed when the belt motor speed is switched.

0079

Belt status error

PI1

When the belt motor status is not any of acceleration, normal, or deceleration when it is switched.

0080

Image start position output 
timing error

S2,S3,SW301

When the image start position signal is output during acceleration while a document is fed from the 
waiting position to the image start position during the stream reading.

0081

Reverse speed setting error 

PI5

When the specified speed of the reverse motor is less than the minimum speed (100 mm/s) or more than 
the maximum speed (700 mm/s).

0082

Reverse speed switch error

PI5

When the reverse motor is not in the normal speed when the reverse motor speed is switched.

0083

Reverse status error

PI5

When the reverse motor status is not any of acceleration, normal, or deceleration when it is switched.

0084

Last document error

PI1

A belt motor error occurs while a last document is being delivered or moved from the platen roller.

0085

Error

PI1,PI2,PI11

When a motor error other than IPC communication/ pickup error occurs. (less than three times)

0090

ADF open

PI10

When opening of the ADF is detected.

0091

User ADF open

PI10

When opening of the ADF is detected while the machine is in operation.

0092

Cover open

PI3,PI6

When opening of a cover (front or rear) is detected.

Code

Type of Jam

Sensor No.

Details

Summary of Contents for imagePRESS C1


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePRESS C1

Canon imagePROGRAF W8400 Driver Manual preview
imagePROGRAF W8400
Brand: Canon Pages: 24
Canon imagePROGRAF TZ-30000 Setup Manual preview
imagePROGRAF TZ-30000
Brand: Canon Pages: 66
Canon imagePROGRAF W7200 Setup Manual preview
imagePROGRAF W7200
Brand: Canon Pages: 126
Canon imagePROGRAFi iPF840 series Basic Manual preview
imagePROGRAFi iPF840 series
Brand: Canon Pages: 149
Canon IPF850 Basic Manual preview
IPF850
Brand: Canon Pages: 166
Canon iP4000 - PIXMA Photo Printer Start Here preview
iP4000 - PIXMA Photo Printer
Brand: Canon Pages: 2
Olympus P 400 Firmware Upgrade Manual preview
P 400
Brand: Olympus Pages: 3
Canon BW Remote Operators Software Kit-A1 Service Manual preview
BW Remote Operators Software Kit-A1
Brand: Canon Pages: 20
Canon imageRUNNER 2420 Trouble Error Codes List preview
imageRUNNER 2420
Brand: Canon Pages: 30
Canon IPF850 Service Manual preview
IPF850
Brand: Canon Pages: 51
Canon imageCLASS LBP325dn Service Manual preview
imageCLASS LBP325dn
Brand: Canon Pages: 252
Oki C5800 Brochure & Specs preview
C5800
Brand: Oki Pages: 6
Oki C7300 Référence Matérielle preview
C7300
Brand: Oki Pages: 44
Oki C7500 Enhancements Manual preview
C7500
Brand: Oki Pages: 13
Oki C7300 Software Installation Manual preview
C7300
Brand: Oki Pages: 20
Oki C7300 Specifications preview
C7300
Brand: Oki Pages: 2
Oki C5300 Setup Manual preview
C5300
Brand: Oki Pages: 28
TallyGenicom 9022 Brochure & Specs preview
9022
Brand: TallyGenicom Pages: 3

Brands by name

Popular brands

Load more brands