imagePRESS C910/C810/C710 Customer Expectations Document
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Page 87
6.34.2 SDD 2-Knife Trimmer STR6702 Specifications
Item
Specifications
Required Equipment
SDD Front Trimmer BLT6989
Booklet Size
(Length)
Before Trimming
Bypass
Trimmed
Minimum
8.07” (205 mm)
5.9” (150 mm)
7.9” (200 mm)
Maximum
13.4” (340 mm)
12.6” (320 mm)
12.6” (320 mm)
Booklet Width (X)
Approximately 2” to 9.6” (50 mm to 245 mm)
Supported Paper Weight
16 lb bond to 110 lb cover (60 to 300 g/m
2
)
Maximum Booklet Thickness
Trimming:
Up to 0.2” (5 mm)
Bypass:
Up to 0.23” (6 mm)
Trim Amount
Approximately 0.08” to 1.38” (2 mm to 35 mm) each side
Asymmetrical Trim
Approximately ±0.59” (±15 mm)
Booklet Staple Clearance
from Top/Bottom (Minimal)
Approximately 1.57” (40 mm)
Speed
LTRR:
Up to 1,800 booklets/hour
11” x 17”: Up to 1,800 booklets/hour
Power Source
From the SDD BLM300C Professional Booklet Maker
Dimensions (H x W x D)
Operational:
43 3/8” x 23 5/8” x 27 1/2” (1,110 mm x 600 mm x 700 mm)
On Pallet in Box:
61 7/8” x 47 1/4” x 31 1/2” (1,570 mm x 1,200 mm x 800 mm)
Weight
Operational:
Approximately 451.9 lb (205 kg)
On Pallet in Box:
Approximately 595.2 lb (270 kg)
6.34.3 SDD Rotator RTM6940 Specifications
Item
Specifications
Supported Paper size
Rotation Enabled:
LTR, 9” x 12”,
Custom Short Edge: 8” to 9.05” (203 mm to 230 mm)
Custom Long Edge: 8” to 12.6” (203 mm to 320 mm)
Rotation Disabled (Bypass):
11” x 17”
Custom Short Edge: 8” to 12.6” (203 mm to 320 mm),
Custom Long Edge: 8” to 20” (203 mm to 508 mm)
Supported Paper Weight
16 lb bond to 110 lb cover (60 to 300 g/m
2
)
Power Source
120V, 15 A, NEMA 5-15P
Dimensions (H x W x D)
Operational:
42 1/8” x 26 3/4” x 26 3/8” (1,070 mm x 680 mm x 670 mm)
On Pallet in Box:
61 7/8” x 47 1/4” x 31 1/2” (1,570 mm x 1,200 mm x 800 mm)
Weight
Operational:
Approximately 286.6 lb (130 kg)
On Pallet in Box:
Approximately 440.9 lb (200 kg)
85 Booklet heights between 320 mm and 340 mm must be trimmed to 320 mm or less.
86 On booklets of approximately 20 sheets or more, always use cover sheets that weigh 120 g/m
2
or heavier to prevent trimming
deviations.
87 Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected by circuit
breakers.
