2
2
2-16
2-16
Procedure of Replacement/Cleaning > Cleaning > Cleaning the Fixing Refresh Roller > Cleaning Procedure
Procedure of Replacement/Cleaning > Cleaning > Cleaning the Fixing Refresh Roller > Cleaning Procedure
5) Hold the handle [1], and open the Inner Delivery Unit [2].
[1]
[2]
CAUTION:
Do not touch the surface [A] of the Fixing Belt and the surface [B] of the Pressure Belt.
[A]
[B]
F-2-31
F-2-30
6) By rotating the Fixing Refresh Roller while holding its edge [A] ( the area 1 cm from the two
ends of the roller ), clean its surface [B] with lint-free paper [1] moistened with alcohol.
[A]
[B]
[1]
1cm
CAUTION:
Do not touch the center [A] of the surface of the Fixing Refresh Roller (any area other
than the area 1 cm from the two ends of the roller [B]).
[A]
[B]
1cm
[B]
1cm
F-2-33
F-2-32
