Canon
imagePRESS V1000 Customer Expectations Document
Revision 4
imagePRESS V1000 Customer Expectations Document
Page 74
7.16 GBC Multi Function Professional Puncher-C1
Item
Specifications
Restricted Equipment
Not compatible with the Inspection Unit-B1 when using the PRISMAsync
controller
Paper Size
Long Edge
First
LTR, STMT
Short Edge
First
LTR, LTR Double Punch, LGL, 11” x 17”, 11” x 17” Double Punch
Tab
LTR with 3, 4, 5, 8, and 10 tabs
STMT with 3 and 5 tabs
Paper Weight
Plain Paper:
20 lb bond to 110 lb cover (75 to 300 g/m
2
)
Coated Paper: 32 lb bond to 110 lb cover (120 to 300 g/m
2
)
Clear Cover:
7 mil
Bypass Mode
Supports all paper sizes and stock as main engine
Punch Capacity
1 sheet (from 75 g/m
2
to 300 g/m
2
)
Power Source
115V AC, 60 Hz
Dimensions (W x D x H)
17.5” x 31.3” x 40.9” (445 mm x 795 mm x 1,040 mm)
Weight
Approximately 224.9 lb (102 kg)
OHP/transparencies and film cannot be punched or creased with the Multi Function Professional Puncher-C1.
Bypass is supported.
10 With the imagePRESS D3000 controller, the Perfect Binder, Multi Function Professional Puncher, and GBC eWire
accessories can be attached, but inspection mode is not available when configured with the Inspection Unit. With the
PRISMAsync controller, the Perfect Binder, Multi Function Professional Puncher, and GBC eWire cannot be attached
when configured with the Inspection Unit.
IMPORTANT
Settings for the GBC Multi Function Professional Puncher must be made from
the engine UI. Settings made on the Puncher’s UI will not take effect.
46 The paper weight and paper stocks differ, depending on the selected die set.
